mjstew33
Dec 23, 10:24 PM
ahhh....much better.
No more annoying product categories. Anyone know what is different besides the look?
ipod ipod ipod ipod :rolleyes:
No more annoying product categories. Anyone know what is different besides the look?
ipod ipod ipod ipod :rolleyes:
748s
Oct 1, 05:21 AM
it's advertising. they use what looks best. one tv advert [where i am] showed someone doing their banking via the internet on an imac. the bank concerned doesn't support macs. a large pc seller has a an advert about leasing instead of buying, the computer used in the advert is a pismo, the apple logo is PSed out
jvaska
Feb 23, 10:43 AM
I got the same error message...I use CocalMySQL too...
gsfesz
Apr 10, 06:20 AM
I just started to back up when I installed lion
more...
nanofrog
Apr 24, 09:32 PM
So I'm a freelance Editor/Motion Graphics guy with no real understanding of RAID Controller Cards, or how they work.
As of right now I have three 1TB drives inside my Mac Pro, RAIDed together (stripe 0) using the OS. No Raid card.
The drives are all 7200rpm from varying manufacturers. (not sure if this matters.)
My questions is; is it beneficial for me to get a RAID card to control these drives vs. leaving it to the OS to handle? Any suggestions for me?
Thanks.
2010 8-Core Mac Pro 2.4
14GB RAM
It all depends on the details of how you use the system (RAID is supposed to be configured to the specific usage, so there's no "one size fits all", though for narrowed usage patterns, you will see similarities).
I'd advise you to search out previous RAID threads (there's quite a few), and pay attention to the various questions asked, and get back to us with some answers). I'd also recommend you review Wiki's RAID page (http://en.wikipedia.org/wiki/RAID) (pay particular attention to the different levels).
If you're a paid professional, using a stripe set (RAID 0) is a disaster waiting to happen. Even with a backup, you'll spend a fair bit of time to perform a recovery when a disk dies (matter of when, not if), and this also means re-performing work that was done between the most recent backup and when the array failed (beyond replacing the bad disk and restoring all the backup files, which presumably <worst case>, will be multiples to return all the data you have from your backup media).
Glad to see you at least have some sort of backup with your current configuration. :)
Now if you go with a RAID card, you'll need to use enterprise grade drives for stability reasons (different recovery timings in the firmware than consumer models, which tend to be unstable as a result). Unfortunately, they're not as cheap (in fact, can be 2x as expensive as their consumer counterparts for the latest capacity).
Consumer disks are fine for backup purposes though, and this can save you a considerable amount of funds, particularly if your capacity requirements are high (i.e. eSATA card + Port Multiplier based external enclosure; example kit (http://www.newegg.com/Product/Product.aspx?Item=N82E16816111136&cm_re=tr4mp-_-16-111-136-_-Product)).
There are some inexpensive products that claim RAID 5, but be careful. Some are software based, which should never be used for this level (no solution to the "write hole issue" associated with parity based arrays). Others use very inexpensive hardware RAID controllers (aka RoC = RAID on a Chip). They're slow for primary usage, and is why they're cheap (compromise on performance vs. proper RAID cards).
If on a budget you could go with RAID-Z, it involves switching to the ZFS file system. RAID-Z1 apparently offers similar performance to RAID5. Read this thread (http://forums.macrumors.com/showthread.php?t=1135718) for further insight.
This can get complicated on the software end though, and not recommended for those that aren't comfortable with the additional complexity (patches for OS X or via VM), particularly for a DAS system (has more merit with NAS or SAN IMO).
So I'd stick with a 3rd party hardware RAID card, assuming this is actually needed, enterprise disks and any enclosures/mounting hardware necessary. Much simpler in terms of software (install the drivers, and any interface software that's required to access the card settings), and the hardware aspect isn't that difficult either.
I would get an SSD for the OS and use the 3x 7200rpm Disks in RAID5.
RAID5 is great for storing uncompressed video data and in your case would offer protection against a single drive failure.
Most cards don't deal with consumer grade disks very well (ATTO and Area definitely don't).
But consumer disks are fine for backup purposed (i.e via eSATA and PM enclosures) due to the lower duty cycle (where you can cut costs effectively, and not endanger the data).
or Just RAID5 with 3x HDD's and partition the RAID volume.
I wouldn't do this if both partitions are to be used simultaneously (i.e. primary data one one partition, scratch data on the other).
The most recommend cards right now are the Areca 6g 1880 series or the new ATTO 6G series. For your needs something like the ARC-1880-i SAS 6G RAID Controller would suffice if you don't plan to connect external RAID/Storage solution.
Those are the best recommendations as far as brand and series per. As to a specific model, it will depend on the specifics, particularly for growth (i.e 8 ports may be outgrown in under 3 years, so getting a card with sufficient ports to last that long would be cheaper in the long run - just add disks and enclosures as necessary).
Sorry should have been more clear (like I said I'm dumb) I have a 500GB Boot drive that lives independently from the (3) 1TB drives RAIDED together via the OS.
A separate boot disk is advisable, as you still have a working OS if the array goes down (allows you to access the card, use the browser to search for help, or deal with Support from the card manufacturer if needed).
And ALL data (3.5TB's) is backed up by an external 4TB Time Machine RAID (2 drives @ 2TB each)...which is connected via 2 eSATA cables via the eSATA PCI Card I bought from OWC...which I guess is actually RAIDed by the OS as well.
That backup solution is a RAID 0. The overall backup solution will almost certainly need to change in order to be sufficient for the primary storage pool you'll end up with.
Not sure what you are looking at, since 3 drives is sort of an odd combination. I have a 2009/2010 Mac Pro Nehalem, running the apple sas card for the 4 internal bays (yes I know they make adapters to use 3rd party cards), and the performance is fair, not great but fair. About 300Mb/s read/write with 4 WD Black edition drives (1tb each). Externally, running an Areca 1680x card, with a 8 drive ProAvio chassis, 8 SAS Seagate 15k7 drives (450GB) which gives close to 900MB/s. I have tried multiple cards over the years, nano and I have exchanged lots of posts/messages. Email/PM me with specific questions and I will try and help you. Beware of most of these 3rd party slot adapters/etc. they are more hassle than they are worth.
I've not heard or seen any issues with the MaxUpgrades kit.
As per Apple's card, I'm no fan of it, particularly due to the cost/performance ratio.
BTW, the OP only has 2 posts at the time of writting this, so returning a PM isn't possible yet (needs to have 5 posts IIRC). email would work if you have that enabled.
As of right now I have three 1TB drives inside my Mac Pro, RAIDed together (stripe 0) using the OS. No Raid card.
The drives are all 7200rpm from varying manufacturers. (not sure if this matters.)
My questions is; is it beneficial for me to get a RAID card to control these drives vs. leaving it to the OS to handle? Any suggestions for me?
Thanks.
2010 8-Core Mac Pro 2.4
14GB RAM
It all depends on the details of how you use the system (RAID is supposed to be configured to the specific usage, so there's no "one size fits all", though for narrowed usage patterns, you will see similarities).
I'd advise you to search out previous RAID threads (there's quite a few), and pay attention to the various questions asked, and get back to us with some answers). I'd also recommend you review Wiki's RAID page (http://en.wikipedia.org/wiki/RAID) (pay particular attention to the different levels).
If you're a paid professional, using a stripe set (RAID 0) is a disaster waiting to happen. Even with a backup, you'll spend a fair bit of time to perform a recovery when a disk dies (matter of when, not if), and this also means re-performing work that was done between the most recent backup and when the array failed (beyond replacing the bad disk and restoring all the backup files, which presumably <worst case>, will be multiples to return all the data you have from your backup media).
Glad to see you at least have some sort of backup with your current configuration. :)
Now if you go with a RAID card, you'll need to use enterprise grade drives for stability reasons (different recovery timings in the firmware than consumer models, which tend to be unstable as a result). Unfortunately, they're not as cheap (in fact, can be 2x as expensive as their consumer counterparts for the latest capacity).
Consumer disks are fine for backup purposes though, and this can save you a considerable amount of funds, particularly if your capacity requirements are high (i.e. eSATA card + Port Multiplier based external enclosure; example kit (http://www.newegg.com/Product/Product.aspx?Item=N82E16816111136&cm_re=tr4mp-_-16-111-136-_-Product)).
There are some inexpensive products that claim RAID 5, but be careful. Some are software based, which should never be used for this level (no solution to the "write hole issue" associated with parity based arrays). Others use very inexpensive hardware RAID controllers (aka RoC = RAID on a Chip). They're slow for primary usage, and is why they're cheap (compromise on performance vs. proper RAID cards).
If on a budget you could go with RAID-Z, it involves switching to the ZFS file system. RAID-Z1 apparently offers similar performance to RAID5. Read this thread (http://forums.macrumors.com/showthread.php?t=1135718) for further insight.
This can get complicated on the software end though, and not recommended for those that aren't comfortable with the additional complexity (patches for OS X or via VM), particularly for a DAS system (has more merit with NAS or SAN IMO).
So I'd stick with a 3rd party hardware RAID card, assuming this is actually needed, enterprise disks and any enclosures/mounting hardware necessary. Much simpler in terms of software (install the drivers, and any interface software that's required to access the card settings), and the hardware aspect isn't that difficult either.
I would get an SSD for the OS and use the 3x 7200rpm Disks in RAID5.
RAID5 is great for storing uncompressed video data and in your case would offer protection against a single drive failure.
Most cards don't deal with consumer grade disks very well (ATTO and Area definitely don't).
But consumer disks are fine for backup purposed (i.e via eSATA and PM enclosures) due to the lower duty cycle (where you can cut costs effectively, and not endanger the data).
or Just RAID5 with 3x HDD's and partition the RAID volume.
I wouldn't do this if both partitions are to be used simultaneously (i.e. primary data one one partition, scratch data on the other).
The most recommend cards right now are the Areca 6g 1880 series or the new ATTO 6G series. For your needs something like the ARC-1880-i SAS 6G RAID Controller would suffice if you don't plan to connect external RAID/Storage solution.
Those are the best recommendations as far as brand and series per. As to a specific model, it will depend on the specifics, particularly for growth (i.e 8 ports may be outgrown in under 3 years, so getting a card with sufficient ports to last that long would be cheaper in the long run - just add disks and enclosures as necessary).
Sorry should have been more clear (like I said I'm dumb) I have a 500GB Boot drive that lives independently from the (3) 1TB drives RAIDED together via the OS.
A separate boot disk is advisable, as you still have a working OS if the array goes down (allows you to access the card, use the browser to search for help, or deal with Support from the card manufacturer if needed).
And ALL data (3.5TB's) is backed up by an external 4TB Time Machine RAID (2 drives @ 2TB each)...which is connected via 2 eSATA cables via the eSATA PCI Card I bought from OWC...which I guess is actually RAIDed by the OS as well.
That backup solution is a RAID 0. The overall backup solution will almost certainly need to change in order to be sufficient for the primary storage pool you'll end up with.
Not sure what you are looking at, since 3 drives is sort of an odd combination. I have a 2009/2010 Mac Pro Nehalem, running the apple sas card for the 4 internal bays (yes I know they make adapters to use 3rd party cards), and the performance is fair, not great but fair. About 300Mb/s read/write with 4 WD Black edition drives (1tb each). Externally, running an Areca 1680x card, with a 8 drive ProAvio chassis, 8 SAS Seagate 15k7 drives (450GB) which gives close to 900MB/s. I have tried multiple cards over the years, nano and I have exchanged lots of posts/messages. Email/PM me with specific questions and I will try and help you. Beware of most of these 3rd party slot adapters/etc. they are more hassle than they are worth.
I've not heard or seen any issues with the MaxUpgrades kit.
As per Apple's card, I'm no fan of it, particularly due to the cost/performance ratio.
BTW, the OP only has 2 posts at the time of writting this, so returning a PM isn't possible yet (needs to have 5 posts IIRC). email would work if you have that enabled.
crush500
Apr 27, 09:06 PM
Thank you so much! I've been searching everywhere and wasn't able to find a concrete answer. That just makes AppleCare even more of a no-brainer!
more...
lordonuthin
Oct 21, 09:05 PM
Still haven't figured out what the problem is with GPU2 in wine.
[19:50:44] Working on queue slot 01 [October 21 19:50:44 UTC]
[19:50:44] + Working ...
Warning: Ignoring unknown arg
[19:50:44]
[19:50:44] *------------------------------*
[19:50:44] Folding@Home GPU Core - Beta
[19:50:44] Version 1.25 (Mon Mar 2 19:49:32 PST 2009)
[19:50:44]
[19:50:44] Compiler : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86
[19:50:44] Build host: vspm46
[19:50:44] Board Type: Nvidia
[19:50:44] Core :
[19:50:44] Preparing to commence simulation
[19:50:44] - Looking at optimizations...
[19:50:44] - Created dyn
[19:50:44] - Files status OK
[19:50:44] - Expanded 68640 -> 357580 (decompressed 520.9 percent)
[19:50:44] Called DecompressByteArray: compressed_data_size=68640 data_size=357580, decompressed_data_size=357580 diff=0
[19:50:44] - Digital signature verified
[19:50:44]
[19:50:44] Project: 5915 (Run 13, Clone 422, Gen 13)
[19:50:44]
[19:50:44] Assembly optimizations on if available.
[19:50:44] Entering M.D.
Reading file work/wudata_01.tpr, VERSION 3.1.4 (single precision)
Reading file work/wudata_01.tpr, VERSION 3.1.4 (single precision)
Reading sasa-enabled ir 0 0
Initializing Nvidia gpu library
[19:50:50] Tpr hash work/wudata_01.tpr: 2601313573 3913075720 1380217986 614781101 1211686473
Run: exception thrown during GuardedRun
[19:50:50] SEH code: 3221225477
[19:50:50] Run: exception thrown during GuardedRun
[19:50:50] Run: exception thrown in GuardedRun -- Gromacs cannot continue further.
[19:50:50] Going to send back what have done -- stepsTotalG=0
[19:50:50] Work fraction=0.0000 steps=0.
[19:50:54] logfile size=4917 infoLength=4917 edr=0 trr=23
[19:50:54] - Writing 5453 bytes of core data to disk...
[19:50:54] Done: 4941 -> 1839 (compressed to 37.2 percent)
[19:50:54] ... Done.
[19:50:54]
[19:50:54] Folding@home Core Shutdown: UNSTABLE_MACHINE
[19:50:44] Working on queue slot 01 [October 21 19:50:44 UTC]
[19:50:44] + Working ...
Warning: Ignoring unknown arg
[19:50:44]
[19:50:44] *------------------------------*
[19:50:44] Folding@Home GPU Core - Beta
[19:50:44] Version 1.25 (Mon Mar 2 19:49:32 PST 2009)
[19:50:44]
[19:50:44] Compiler : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86
[19:50:44] Build host: vspm46
[19:50:44] Board Type: Nvidia
[19:50:44] Core :
[19:50:44] Preparing to commence simulation
[19:50:44] - Looking at optimizations...
[19:50:44] - Created dyn
[19:50:44] - Files status OK
[19:50:44] - Expanded 68640 -> 357580 (decompressed 520.9 percent)
[19:50:44] Called DecompressByteArray: compressed_data_size=68640 data_size=357580, decompressed_data_size=357580 diff=0
[19:50:44] - Digital signature verified
[19:50:44]
[19:50:44] Project: 5915 (Run 13, Clone 422, Gen 13)
[19:50:44]
[19:50:44] Assembly optimizations on if available.
[19:50:44] Entering M.D.
Reading file work/wudata_01.tpr, VERSION 3.1.4 (single precision)
Reading file work/wudata_01.tpr, VERSION 3.1.4 (single precision)
Reading sasa-enabled ir 0 0
Initializing Nvidia gpu library
[19:50:50] Tpr hash work/wudata_01.tpr: 2601313573 3913075720 1380217986 614781101 1211686473
Run: exception thrown during GuardedRun
[19:50:50] SEH code: 3221225477
[19:50:50] Run: exception thrown during GuardedRun
[19:50:50] Run: exception thrown in GuardedRun -- Gromacs cannot continue further.
[19:50:50] Going to send back what have done -- stepsTotalG=0
[19:50:50] Work fraction=0.0000 steps=0.
[19:50:54] logfile size=4917 infoLength=4917 edr=0 trr=23
[19:50:54] - Writing 5453 bytes of core data to disk...
[19:50:54] Done: 4941 -> 1839 (compressed to 37.2 percent)
[19:50:54] ... Done.
[19:50:54]
[19:50:54] Folding@home Core Shutdown: UNSTABLE_MACHINE
hookem12387
Mar 1, 04:57 PM
I think I was about 15 seconds late on this:(
more...
rebootit
Feb 26, 08:51 AM
Anyone help on this one. I have had a mini server running for over a year problem free. Last night sometime the server came up with a warning that there was another machine on the network with the same name so it decided to change its name. It was dnssigns and now is reading dnssigns2. Problem is NO other machine on the network has a name anywhere close to that. This has caused havoc as far as apple tvs etc. All functions are running fine, nothing seems out of place, network traffic is normal etc. I still have all admin control. Any idea why a machine would allow, say a person trying to hack into the network with a same named machine and no passwords, to get in and then decide to change its name?
supermassive
Oct 9, 12:26 PM
Did anyone install it already?
I've received it 2 days ago but still have the stealth guard on my iPt which is going to be replaced in a week, so I will put the bse on the replacement-device.
Are those bse for a dry installation? I've received them in an envelope without a solution, just like the stealth guards.
I've received it 2 days ago but still have the stealth guard on my iPt which is going to be replaced in a week, so I will put the bse on the replacement-device.
Are those bse for a dry installation? I've received them in an envelope without a solution, just like the stealth guards.
more...
three
Aug 19, 12:08 AM
congrats to your iMac G3 , they are such cute little computers and not only Tiger runs well ,it is surprisingly fast if you consider that the computer is nearly 10 years old , i just love these little buggers , they are like pets but dont wee on your carpet :D
Thanks to you MacHamster, and 92Ward. My friend got it from a school district and since he is leaving for service in a week he decided to give it to me. I'm sure you could find an iMac G3 or a few for sale or just given away by the school districts. I know the local school districts has a company auction off palettes of them for cheap.
The iMac G3 is still amazingly usable in these days. It's a great iTunes server, and a wonderful web browsing machine. I love the iMac G3.
Thanks to you MacHamster, and 92Ward. My friend got it from a school district and since he is leaving for service in a week he decided to give it to me. I'm sure you could find an iMac G3 or a few for sale or just given away by the school districts. I know the local school districts has a company auction off palettes of them for cheap.
The iMac G3 is still amazingly usable in these days. It's a great iTunes server, and a wonderful web browsing machine. I love the iMac G3.
EricNau
Dec 20, 04:47 PM
Dunno what OS you have, but I will assume up-to-date on everything. Click airport signal thingy on top right, and click "use interference robustness" or whatever it's called. Then try.
What does that do anyways? :confused: Should I have it checked?
What does that do anyways? :confused: Should I have it checked?
more...
McGiord
Apr 5, 07:31 PM
iPhone 4.
cbegf
Nov 13, 09:16 PM
i dont have a boot floppy can i make one from a pc or do you know where i can get one?
more...
alansmallen
Oct 22, 05:28 PM
Kid with the fro
onecajun
Jan 12, 08:10 AM
I would agree with 2tb.. I use the 2tb Hitchai 7200 rpm drives..I have not had luck with the western digital green drives.
I also seen the 2tb Hitchai drives work in the Xserve G5, Xserve and xserve 2009. My Xserve2006 was very flacky.
I do think the 3tb drives will work in the 2008 or newer xserve, but I have not tested it. I will report back on that
I also seen the 2tb Hitchai drives work in the Xserve G5, Xserve and xserve 2009. My Xserve2006 was very flacky.
I do think the 3tb drives will work in the 2008 or newer xserve, but I have not tested it. I will report back on that
more...
jbromer
Apr 7, 12:18 AM
Hmm, nobody likey???
I don't care for kickstand cases in general. I like the concept, but it seems a little bulky...
I don't care for kickstand cases in general. I like the concept, but it seems a little bulky...
Macsavvytech
Apr 18, 02:54 AM
I drilled a hole for the reset/power button but havnt tried that.
I have a dremel and my case is cracking anyways LOL so I will try it.
Also if yall have trouble with software update I figured out how to get latest Firmware installed. I been meaning to post my success and just getting around to it hope it helps.
Install cydelete to get the older version un-installed from the icon. This helps if you have the Cydia glitch that wont allow you to scroll to "y" section or load the yosion source in Cydia.
After install cydelete and then hold on the icons for phone/mms delete them just like you would for a normal non cydia icon app make sure you respring.
1) make sure openssh and ifile are installed respring if need install then step2.
2) on your PC, download WinSCP (windows) here
http://winscp.net/eng/index.php
you can also use Cyberduck (windows/mac) i used winscp
3) connect your ipod touch to your computer. if itunes automatically loads, close that down.
4) start WinSCP.
use the following details to log in to WinSCP
server: Your_IP_address
I used the ip listed under wifi settings.
robert-pattinson-hairstyles-2.
I have a dremel and my case is cracking anyways LOL so I will try it.
Also if yall have trouble with software update I figured out how to get latest Firmware installed. I been meaning to post my success and just getting around to it hope it helps.
Install cydelete to get the older version un-installed from the icon. This helps if you have the Cydia glitch that wont allow you to scroll to "y" section or load the yosion source in Cydia.
After install cydelete and then hold on the icons for phone/mms delete them just like you would for a normal non cydia icon app make sure you respring.
1) make sure openssh and ifile are installed respring if need install then step2.
2) on your PC, download WinSCP (windows) here
http://winscp.net/eng/index.php
you can also use Cyberduck (windows/mac) i used winscp
3) connect your ipod touch to your computer. if itunes automatically loads, close that down.
4) start WinSCP.
use the following details to log in to WinSCP
server: Your_IP_address
I used the ip listed under wifi settings.
Blue Velvet
Mar 30, 09:51 AM
http://griffintechnology.com/products/ivault/index.php
Now this is what I'm looking for. The blue one looks nice... only $US30. :)
Now this is what I'm looking for. The blue one looks nice... only $US30. :)
deuk1219
Apr 22, 07:48 AM
So I skype a lot with my friends and stuff (video chat).
My MBA 13" with 4gb ram gets really loud...
Any other programs out there that will make the MBA run quietly?
Thanks!
My MBA 13" with 4gb ram gets really loud...
Any other programs out there that will make the MBA run quietly?
Thanks!
mkjj
Mar 24, 05:05 AM
I see you have the 16MB memory module, that the one I sold you?
Could have been, it was some time ago now! memory is not what it was. :D
I have two boxed white ones, one with a rare outer shipping box and it came with some additional Pippin literature which can be seen on my Flickr account.
http://www.flickr.com/photos/mac-collection/sets/72157623547637210/
The Black US version with the outer box and manual and the Grey/Black version from KatzMedia which is actually a chassis and plastic case unassembled, two keyboards, wireless controller and an ADB controller.
Could have been, it was some time ago now! memory is not what it was. :D
I have two boxed white ones, one with a rare outer shipping box and it came with some additional Pippin literature which can be seen on my Flickr account.
http://www.flickr.com/photos/mac-collection/sets/72157623547637210/
The Black US version with the outer box and manual and the Grey/Black version from KatzMedia which is actually a chassis and plastic case unassembled, two keyboards, wireless controller and an ADB controller.
John J Rambo
Apr 7, 03:29 AM
Hi, thanks for the responses guys. Below is my php script:
<?php
/* subject and eamil variables */
$emailSubject = 'hello!';
$webMaster = 'info@avenue19ni.com';
/* Gathering Data Variables */
$name = $_POST['name'];
$email = $_POST['email'];
$message = $_POST['message'];
$body = <<<EOD
<br><hr><br>
Name: $name <br>
Email: $email <br>
Message: $message <br>
EOD;
$headers = "From: $email\r\n";
$headers .= "Content-type: text/html\r\n";
$success = mail($webMaster, $emailSubject, $body, $headers);
/* Results rendered as HTML */
$theResults = <<<EOD
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<link href="css/styles.css" rel="stylesheet" type="text/css" media="screen" />
<title>Contact Form Complete</title>
</head>
<body>
</body>
</html>
EOD;
echo "$theResults";
?>
thanks again, this is driving me crazy...
<?php
/* subject and eamil variables */
$emailSubject = 'hello!';
$webMaster = 'info@avenue19ni.com';
/* Gathering Data Variables */
$name = $_POST['name'];
$email = $_POST['email'];
$message = $_POST['message'];
$body = <<<EOD
<br><hr><br>
Name: $name <br>
Email: $email <br>
Message: $message <br>
EOD;
$headers = "From: $email\r\n";
$headers .= "Content-type: text/html\r\n";
$success = mail($webMaster, $emailSubject, $body, $headers);
/* Results rendered as HTML */
$theResults = <<<EOD
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<link href="css/styles.css" rel="stylesheet" type="text/css" media="screen" />
<title>Contact Form Complete</title>
</head>
<body>
</body>
</html>
EOD;
echo "$theResults";
?>
thanks again, this is driving me crazy...
Ozix
May 7, 12:19 AM
If only they had a little more resolution in the 13 and a matte option, I could deal with the dual core and integrated graphics. As for the iMac, I'm getting everything maxed (except for RAM, which I'll do on my own), including the SSD + HDD. Every since installing the c300, I don't think I could go back to just having a traditional HDD, but after reading how tricky a self install of an SSD into an iMac, I'll let Apple do it lol. The OptiBay wasn't too bad, and it's easy enough to reverse if I need to bring it in for warranty issues.
Aaron
Aaron
Mr_Brightside_@
Dec 22, 10:21 PM
hi i know that my old ibook g3s fw port didnt charge my ipod when it was asleep; my new g4 12 1.33 sez it is charging my ipod but the other day my ipod died when it still had some chartge left. does this mean that its simply dead or it is not in fact being charged while asleep, and only when awake? thankx. ruby, don't take your love to town
No comments:
Post a Comment