wickedG35
Mar 12, 10:34 PM
Hey Guys,
For sale is my backup 8GB iPhone. It is currently unlocked for use with any GSM carrier. As you can see from the pics, it has a crack up top and a small one on the bottom right corner. This is purely cosmetic and has no affect on the phone whatsoever. Touch sensitivity works fine anywhere on the screen as well as the phone feature/speakers. This iPhone is perfectly functioning!
Take a look at the pics and ask any questions in the thread!
I am taking offers!
For sale is my backup 8GB iPhone. It is currently unlocked for use with any GSM carrier. As you can see from the pics, it has a crack up top and a small one on the bottom right corner. This is purely cosmetic and has no affect on the phone whatsoever. Touch sensitivity works fine anywhere on the screen as well as the phone feature/speakers. This iPhone is perfectly functioning!
Take a look at the pics and ask any questions in the thread!
I am taking offers!
sammich
Feb 17, 07:29 PM
Hugh Laurie isn't going to be too happy about this.
TreborM
Mar 27, 10:29 AM
I have been using screen in the osx terminal to get serial access, using the following:
screen telnet /dev/tty.usbserial
Unfortunately I can't scrollback in screen, which makes copying long config files a process of :apple:-C, :apple:-V, and repeat. Any suggestions for native serial support in the osx terminal app WITH scrollback?
I do not understand why you are using screen to launch telnet instead of invoking it directly, but try using logging in screen (-L if memory serves right)
Personally I would use tee to make a copy of the output in a file and extract your config files from this file.
Also IIRC Cisco's iOS lets you save and load config files directly. I do not remember the exact syntax but try built-in help...
Hope this helps,
Trebor.
screen telnet /dev/tty.usbserial
Unfortunately I can't scrollback in screen, which makes copying long config files a process of :apple:-C, :apple:-V, and repeat. Any suggestions for native serial support in the osx terminal app WITH scrollback?
I do not understand why you are using screen to launch telnet instead of invoking it directly, but try using logging in screen (-L if memory serves right)
Personally I would use tee to make a copy of the output in a file and extract your config files from this file.
Also IIRC Cisco's iOS lets you save and load config files directly. I do not remember the exact syntax but try built-in help...
Hope this helps,
Trebor.
maflynn
Apr 18, 02:10 PM
My only concern is speed. I'm used to turning on the camera and taking a shot. With P&S you have the latency, which drove me to the DSLRs in the first place.
I'll have to take a look at TZ-7, the wide angle may be enough of a justification to buy a new one
I'll have to take a look at TZ-7, the wide angle may be enough of a justification to buy a new one
more...
eyelikeart
Nov 7, 03:14 PM
hehe...fair enough...
there was about 6 or so in a row the other day...just thought u may know about it...
but now that u do...u have something to look forward to... ;)
there was about 6 or so in a row the other day...just thought u may know about it...
but now that u do...u have something to look forward to... ;)
navigates
Apr 29, 12:55 PM
It�s been a very long time until any news in and around unlocks is out now. During 3g, 3gs, the unlocks were very quick. On the IP4, the wait was around the latest release of the 4.3. Now we are 4.3.1. I believe 4.3.1 has changed the baseband again to a new algorithm. I'm not sure if they will hang on for some time with the new algorithm or release the unlock.
I just went for a short business trip and used data roaming which costs about 19.95 an MB. Trip was sudden and I didn't have the time to purchase the rebel or gevey.
In my opinion it is wrong in AT&T's part to not genuinely unlock the iPhone when there are legitimate users satisfying the contract. In any case they have an early termination fee any ways.
Instead of us pursing the dev team, we should start an online petition to enable AT&T unlocking the iPhone legally.
I just went for a short business trip and used data roaming which costs about 19.95 an MB. Trip was sudden and I didn't have the time to purchase the rebel or gevey.
In my opinion it is wrong in AT&T's part to not genuinely unlock the iPhone when there are legitimate users satisfying the contract. In any case they have an early termination fee any ways.
Instead of us pursing the dev team, we should start an online petition to enable AT&T unlocking the iPhone legally.
more...
drew.bowser
Feb 18, 10:59 AM
I have not done an SSD per say, but I have made a little side business upgrading the hard drive on 2010 Mac Mini's and selling them on ebay. After having done 10 or so of these, yes you do need to pull the logic board out slightly. The hard drive will not lift up enough to give you the angle you need clear the logic board with out pulling it out.
That said, only pull it out enough to see a small gap of air between the black beisl in the rear and the alum case.
WRT the heat sensors... I have found that the smallest amount of rubber cement works well if you you loose the adhesive when transferring the sensor. 8/10 times you will have plenty of stick left though and wont need to add any.
The black cover I have also assumed was there for air flow as well. If the SSD has a smooth surface, and not logic board to short, you probably can do away with it.
I will say that the OWC video is dead on. Follow it precisely. PAY ATTENTION TO THE SENSORS ON THE HDD. THEY BREAK VERY EASILY!!
I found that out the hard way. I have a new sensor on the way as we speak.
I second everything tek is saying. He's a smart guy :)
TEK - QUESTION - the glue...you can use standard rubber cement? It doesnt have to be a special kind of thermal glue or anything??
That said, only pull it out enough to see a small gap of air between the black beisl in the rear and the alum case.
WRT the heat sensors... I have found that the smallest amount of rubber cement works well if you you loose the adhesive when transferring the sensor. 8/10 times you will have plenty of stick left though and wont need to add any.
The black cover I have also assumed was there for air flow as well. If the SSD has a smooth surface, and not logic board to short, you probably can do away with it.
I will say that the OWC video is dead on. Follow it precisely. PAY ATTENTION TO THE SENSORS ON THE HDD. THEY BREAK VERY EASILY!!
I found that out the hard way. I have a new sensor on the way as we speak.
I second everything tek is saying. He's a smart guy :)
TEK - QUESTION - the glue...you can use standard rubber cement? It doesnt have to be a special kind of thermal glue or anything??
kdoug
May 2, 09:37 PM
I have a 2011 MBP 17" and I order the kit from MaxUpgrades.
The kit including optibay, enclosure for superdrive and a Vertex3 120GB and two day shipping was $370 IRC. They even managed to ship the same day I ordered. So it was definitely a plus. Considering you have a maybe pick a SATAII based SSD unless you plan to upgrade some time down the road so you could recycle the SATAIII SSD.
The only downside is that it doesn't come with any instruction. But then again, it's not very different to others. Just be careful and you shouldn't have any problem.
The optibay is very well made, feels solid when holding. I didn't have any fitting issue although some other users have reported some slight problems. I think it's because they are pretty tight fit, so don't tighten then screw all the way until you have all 3 on.
I ordered the Maxupgrades kit also. Seemed like a bargain compared to OWC's. I've been rally happy with the dealings I've had with them. I have no idea why there's a love affair with OWC. Opened or unopened, their 15% restocking fee is a sham.
The kit including optibay, enclosure for superdrive and a Vertex3 120GB and two day shipping was $370 IRC. They even managed to ship the same day I ordered. So it was definitely a plus. Considering you have a maybe pick a SATAII based SSD unless you plan to upgrade some time down the road so you could recycle the SATAIII SSD.
The only downside is that it doesn't come with any instruction. But then again, it's not very different to others. Just be careful and you shouldn't have any problem.
The optibay is very well made, feels solid when holding. I didn't have any fitting issue although some other users have reported some slight problems. I think it's because they are pretty tight fit, so don't tighten then screw all the way until you have all 3 on.
I ordered the Maxupgrades kit also. Seemed like a bargain compared to OWC's. I've been rally happy with the dealings I've had with them. I have no idea why there's a love affair with OWC. Opened or unopened, their 15% restocking fee is a sham.
more...
SBik2
Jun 3, 12:39 AM
yep.this ones pretty good.
TwinCities Dan
Apr 12, 08:43 PM
What's older? The Mac's or the clear phone? :p
more...
Chaszmyr
Oct 1, 03:01 AM
that comp is deffinately not a powerbook.
ChargedPC
May 6, 12:09 PM
Seagate Barracuda 1TB in our 2.7GHz 27" i5.
Anyone successfully swapped out their stock hard drive for an upgraded size, or does anyone have info on the 2TB sized models?
Also can people post the firmware version if possible. Thanks!
Anyone successfully swapped out their stock hard drive for an upgraded size, or does anyone have info on the 2TB sized models?
Also can people post the firmware version if possible. Thanks!
more...
WildCowboy
Jan 6, 11:55 AM
We're still working on plans, so no need to panic yet. More information will be forthcoming. :)
skyf430design
Jun 29, 12:58 AM
I dropped by around 9 and there was seven people already lined up.. kinda hard to say.. im in an area where there is only one AT&T Store..
more...
nomad01
Sep 23, 01:39 PM
1) The ongoing offer (open every day, a lot of stock) can be seen as a hidden price cut.
2) Clearing out stock may be a sign of updates coming... :rolleyes:
So some of this could be new stock that's just repacked for a low price? Possible I suppose.
Although I wonder where they've dug up the 3rd gen iPods from. Think they've found a stock room that they thought they'd lost? :eek: ;)
2) Clearing out stock may be a sign of updates coming... :rolleyes:
So some of this could be new stock that's just repacked for a low price? Possible I suppose.
Although I wonder where they've dug up the 3rd gen iPods from. Think they've found a stock room that they thought they'd lost? :eek: ;)
[Beta Code]
Jun 14, 05:57 PM
Looks nice, but a little empty in there.
more...
sonofpismo
Dec 20, 04:54 AM
Last time I went to meet-up with some people in SF, we ended up in a "massage" parlor. :eek::o:D
More information please...
:cool:
More information please...
:cool:
SmilesLots
Apr 14, 03:40 PM
Can you still see all your RAM? Is there anything running in the background like Seti@Home and so on?
All the ram is there. No seti's. Thanks.
All the ram is there. No seti's. Thanks.
arn
Nov 3, 10:55 PM
I was playing with something...
http://guides.macrumors.com/Gallery_of_Apple_Leaks_and_Prototypes
I like the concept... need to get more materials.
arn
http://guides.macrumors.com/Gallery_of_Apple_Leaks_and_Prototypes
I like the concept... need to get more materials.
arn
reberto
Dec 7, 02:46 PM
Link doesn't work.
link fixed
link fixed
madroc
Jan 9, 06:56 PM
Thanx mate!
Do u think there will be any iTunes podcast for MWSF 08 immediately as they post the webcast? hope they don't post it as late like last year.
Do u think there will be any iTunes podcast for MWSF 08 immediately as they post the webcast? hope they don't post it as late like last year.
Schiffi
Jul 10, 06:55 PM
And another question, will 802.11g stations always be backwards compatible with 802.11b? As much as I would like faster "G"'s the thought of something sticking out of the side of my pBook upsets me. I want to put off a Cardbus solution as soon as possible.
MrWinters
May 4, 11:17 AM
I just got my hands on a Power Mac G5. I got it off a guy for $150!! Let me say, it's an incredible machine. Dual 2.5 G5's with 2Gig of RAM. I installed 10.5.8 on it.
This machine blows both my 2009 13" Macbook and 2008 Mini out of the water when it comes to speed and smoothness. As is it, FCP runs so much better than my Intel Macs that I am in total Awww of it... (can u tell I'm excited about this 6 year old computer :) )
Since I got it so cheap, I want to upgrade the hell out of it and use it as my primary machine (age of it be damned). I want to expand the RAM fully to 16 GB, put a fast 2 GB HDD in, and get the best possible Video card available.
I have 2 questions:
1. What is the best GPU available for this machine??
2. What is everyone's opinion to the possibility that after I get this thing where I want it, Apple will drop support for Leopard and I will no longer be able to sync my iPhone, iPad, or iPods to it. I of course, Plan to keep my Intel Macs running on the other end of the room (along with my "necessary" PC) but since I sit in THIS chair in my office most of the time, it would be nice to do everything from right here...
I know you don't hear many people wanting to make an older machine their primary computer, but this thing is really a monster...
Any thoughts???? Thanks in Advance.
Al Winters
This machine blows both my 2009 13" Macbook and 2008 Mini out of the water when it comes to speed and smoothness. As is it, FCP runs so much better than my Intel Macs that I am in total Awww of it... (can u tell I'm excited about this 6 year old computer :) )
Since I got it so cheap, I want to upgrade the hell out of it and use it as my primary machine (age of it be damned). I want to expand the RAM fully to 16 GB, put a fast 2 GB HDD in, and get the best possible Video card available.
I have 2 questions:
1. What is the best GPU available for this machine??
2. What is everyone's opinion to the possibility that after I get this thing where I want it, Apple will drop support for Leopard and I will no longer be able to sync my iPhone, iPad, or iPods to it. I of course, Plan to keep my Intel Macs running on the other end of the room (along with my "necessary" PC) but since I sit in THIS chair in my office most of the time, it would be nice to do everything from right here...
I know you don't hear many people wanting to make an older machine their primary computer, but this thing is really a monster...
Any thoughts???? Thanks in Advance.
Al Winters
simsaladimbamba
Apr 7, 07:43 AM
Perhaps I need to be a tad bit clearer.Uhh
-40% of the time I go into a fresh install of windows,I cannot eject(To install mac drivers
-The option key USED to allow me to eject first before i went into windows
-I'll most probably be unable to go back to mac after installation of windows cuz of the option key being unable to work
Okay. Maybe I am too daft to fully understand you.
Can't you right click on the ODD icon in Windows Explorer?
http://www.ghacks.net/wp-content/uploads/2008/12/mount_iso-500x399.gif
Are both Option keys not working? Have your tried another external USB keyboard? Even a Windows keyboard will work.
And to be absolutely sure, and so I understand correctly, as this is new to me, you were able to eject any optical media inside the ODD by just pressing the OPTION key during the boot process into Windows (after you restarted the Mac and chose to boot Windows)?
If you have successfully installed the Windows drivers from the Mac OS X DVD, then you can use the Boot Camp Utility in the Task Bar to restart into Mac OS X.
-40% of the time I go into a fresh install of windows,I cannot eject(To install mac drivers
-The option key USED to allow me to eject first before i went into windows
-I'll most probably be unable to go back to mac after installation of windows cuz of the option key being unable to work
Okay. Maybe I am too daft to fully understand you.
Can't you right click on the ODD icon in Windows Explorer?
http://www.ghacks.net/wp-content/uploads/2008/12/mount_iso-500x399.gif
Are both Option keys not working? Have your tried another external USB keyboard? Even a Windows keyboard will work.
And to be absolutely sure, and so I understand correctly, as this is new to me, you were able to eject any optical media inside the ODD by just pressing the OPTION key during the boot process into Windows (after you restarted the Mac and chose to boot Windows)?
If you have successfully installed the Windows drivers from the Mac OS X DVD, then you can use the Boot Camp Utility in the Task Bar to restart into Mac OS X.
No comments:
Post a Comment